admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,282
- Last Active
- Roles
- Administrator
Comments
-
neither part is no longer available.
-
REPLACING WALKING BELT
-
Could be either a motor controller or Drive motor that is shorted out, I would unplug Drive motor from lower board and see if it still trips breaker. If you still trips breaker then the lower board is bad and would need to be replaced.
-
I would contact horizon direct
-
They are out of stock , but we except to arrive in 3 weeks. They are $179.99 and come with a 1 year warranty. To order call 888 362 1105 ext 331
-
LUBE DECK
-
You would need a new console
-
When was the last time yopu lube the walking belt and how old is that walking belt.
-
Sounds like you would need to replace console.
-
You just have to play with the one side of the roller that you can adjust, You want equal amount of space between the walking belt and the side rail. Example if the belt has a 1/2 space between belt and side at the front on the right side but at rea…
-
What is your order #?
-
Motor Belt 220769 - 200J8
-
https://www.treadmilldoctor.com/world-famous-lube-3pk LUBE DECK
-
What could cause unit to slow down is a lack of lube under walking belt. https://www.treadmilldoctor.com/nordictrack-c-2000-treadmill-ntl10841-motor-belt-220769 Once you've added items to your Cart, and you are ready to Check out you can put this Di…
-
does the red switch light up? Is the safety key is place still?
-
If its the frame they have a lifetime warranty on the and I would contact healthrider.
-
Sounds like you have a bad motor controller
-
You can Contact this Company Below about sending in your parts to be repaired. https://fitnesselectronicrepairs.com 954-578-0900
-
Besides a mat, you can fasten a 2 x 4 in front of the unit on the floor.
-
Could be in the drive rollers.
-
May need to tighten deck down.
-
I would contact bodyguard direct.
-
Could be a problem with the drive motor itself.
-
I email you a service manual , so that should help.
-
Could be in the waling platform needs to be tighten down.
-
Could be in the front roller or one of the bearing you replace may be bad.
-
I would apply lube under the belt to see if that helps. also could me a weak motor. If you are able to stop motor by putting a little pressure on the flywheel with foot ,then motor is bad.
-
We only sell new part direct from horizon.
-
LUBE DECK
-
When was the last time you lube under the walking belt?