admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,282
- Last Active
- Roles
- Administrator
Comments
-
Hello! It is possible during the move that you pulled a wire loose. Would you be able to check the wiring from the panel to the speed sensor? Just to make sure everything is still plugged in securely?
-
Hello! We are sorry to hear your treadmill has not been working! This part has been discontinued and we are out of stock but fitnessrepairparts.com has this console available - here is a direct link to the part you need! https://www.fitnessrepairpa…
-
We don't have the wiring diagrams for those units.
-
normally there is a wiring diagram under the hood cover on a piece of paper tape to hood cover
-
You want to get it as close to the center of the belt the best you can, under where you feet will hit when walking or running.
-
what is the serial number?
-
Contact kettler
-
How did you test motor when it was outside unit?
-
Sorry never heard of that brand before, and I have been doing this for over 30 years.
-
https://www.treadmilldoctor.com/walking-belt-friction-problems-kf
-
Sounds like your belt is worn out. https://www.treadmilldoctor.com/treadmill-belt-bogs-down
-
You will need to remove covers and see if you see what is preventing them from moving.
-
The only thing it could be at this point and those console are $969.89 plus shipping.
-
https://www.treadmilldoctor.com/nordictrack-exp2000-treadmill-motor-control-board-8 Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. You then can put this Discount Code ( 5OFFJAMES) in the D…
-
I email you a manual and it shows how drive belt goes on.
-
could be a issue with stop button in console
-
could be the motor controller, would need complete model number off treadmill.
-
couldbe that when unit incline , unit is unlevel which causes belt to move over.
-
Sounds like your console is going
-
Sounds like you have a motor problem for sure.
-
I would contact sole direct.
-
I would contact sole direct.
-
sounds like the console itself.
-
would unplug ribbon cable and clean ends and then reinstall.
-
You would have to take it apart and maybe cut speaker wire inside.
-
I would test your motor. https://www.treadmilldoctor.com/motor-testing. if motor work with battery then its a bad motor controller.
-
part# 347954 for model# 831.248530
-
Sounds like the console lcd is going bad , the cost of that part is $188.89 plus $21.99 shipping. To order please call me 888-362-1105 then enter Ext 331 and ask for Jim.
-
Sounds like the walking belt is worn, when was the last time you lube the belt?
-
Enjoy