admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,001
- Last Active
- Roles
- Administrator
Comments
-
very hard to say, could be a issue with either lower board or incline motor,
-
Sorry we do not handle those units, so i would contact the maker of treadmill.
-
Below is a link for the correct controller and a discount code .https://www.treadmilldoctor.com/nordic-track-motor-control-board-part-number-406939 Once you've added items to your Cart, and you are ready to Check out and you put all your shipping in…
-
You are welcome! You are doing great diagnosing! I would most likely agree with you on that mc board, however to be able to verify this you would need an amp meter, set it to 120V AC, and test the white and red wire and have hopefully some help to…
-
Hello. When a treadmill sits for a long time, it is always good to give it a tune up, cleaning is part of that, however that walk belt had lubrication on the underside initially, and this tends to dry after sitting for a period like 2 years. I wou…
-
the drive belt will be hot because of the friction that belt has to keep its tension.
-
Could be a bad controller or maybe resistance adjustment cable.
-
Soinds like console is bad.
-
Way to go Dillon!
-
Maybe the belt needs to be tighten down somemore or replaced.
-
WTG! Congratulations!
-
about 5 to 6 years
-
Sounds like the issue is in console and they are no longer available. we do offer a treadmill rescue kit below which will work. Treadmill Rescue Kit Here is something that we design for customers who need a console but find the consoles are no long…
-
Sounds like a worn walking belt, you may need to replace it.
-
Congrats! WTG!
-
Just emailed them over to jvonwiegen@treadmilldoctor.com
-
Could be the drive motor is going, but could be cause by a worn walking belt, have ever lube or replace the walking belt?
-
Try using contact cleaner and see if that helps. Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a…
-
Sounds like a worn walking belt, if you contuine to use it you could damage the lower board or motor. Walking / running belts normally only last about 6 to 8 years before they need to be replaced. Once you've added items to your Cart, and you are re…
-
Congratulations!
-
Way to go Martin!!
-
It could be in the membrane itself- https://www.treadmilldoctor.com/pacemaster-pro-plus-overlay-item-appmem Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use this code 1982 at checkout fo…
-
Congratulations Adam
-
Congratulations
-
Congratulations , Don
-
CONGRATULATIONS EVERYONE!!
-
Congratulations everyone
-
Could be that the belt is so worn that when you lube it the lube is coming up thre thr belt.
-
I would see if you have dc voltage up on the main wire harness between red & black wire you should have 8 to 12 vdc. If you don't have the voltage then its a bad motor controller and if you do have the proper voltage its a console.
-
Sounds like the motor controller has gone bad, below is a link for the correct part and a discount code to save 5%. https://www.treadmilldoctor.com/nordic-track-commercial-1500-model-ntl097071-motor-control-board Once you've added items to your Car…