admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,114
- Last Active
- Roles
- Administrator
Comments
-
That white will always get super with a gold belt or worn belt. Really sounds like your motor is weak and you have a worn walking belt.
-
Sounds like you walking belt is worn out. trying doing a amp draw test. https://www.treadmilldoctor.com/dc-amp-draw
-
Does it cut out if you just run treadmill with noone on it?
-
sounds like there could be a short in the wiring - or they could be crimped somewhere
-
Yay for the win! thank you for letting us know it worked for you!
-
Yes it will. Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use this code 1982 at checkout for a 5% discount on your order.
-
Typically when this occurs, it is an indication of a short circuit in the Treadmill Motor Control Board Be sure to test the motor for a short-to-ground condition. If a motor short completely, it can cause a controller to short circuit and have a ru…
-
Most treadmillthese days have a customer program where you can set the distance, or time
-
haha - seems about right in line with how the world is working now-a-days! how long has it been since you have lubed your belt? how old is your belt?
-
May not be the belt that is slipping. MY RUNNING BELT STOPS WHEN I STEP ON IT Here are a few things you can look into to see why your running belt is stopping when you walk on treadmill. • Let’s remove the hood cover on your treadmill.…
-
Typically when this occurs, it is an indication of a short circuit in the Treadmill Motor Control Board Be sure to test the motor for a short-to-ground condition. Be sure to test the other electrical part to confirm they do not have a short-to-gr…
-
here this will help https://www.treadmilldoctor.com/treadmill-doctor-treadmill-belt-cleaner and a little light reading: https://www.treadmilldoctor.com/keys-manual-says-to-use-only-lubenwalk-or-not-to-lube-kf
-
You may need to purchase a mirco sd card and reload and they are $110.89 but out of stock at this time.
-
hello! if you use a damp cloth and Dawn - that is the best detergent... I would suggest though our belt cleaner: https://www.treadmilldoctor.com/treadmill-doctor-treadmill-belt-cleaner and once you have cleaned - please use: https://www.treadmi…
-
hello! did anyone test the red wire & the black wires? You should have anywhere from 8vdc to 12vdc on those two wires.
-
Its coming from motor, check the speed sensor and speed sensor disk on end of motor sounds like that is where the noise is coming from.
-
Hello! Can you check to see if you have 8 to 12 vdc on the red & black wires in the harness going up to the console?
-
Sounds like you walking belt is worn and you have a weak motor.
-
The brushes look fine, you just have a bad motor.
-
I personally do not know how easy or not it is to show items for sale on Ebay but we do have a person that is responsible for removing items that are on backorder from our online presence! Thank you for bringing this to our attention!
-
I saw on another post that you did this already!
-
When you hit the start button and it counts down 321 does time start to count up. if yes then its a bad motor controller and if its no then its in the console
-
Hello! either the resistance motor is not working or the upper console is not sending the voltage down to the resistance motor when you press the up or down buttons, the only way to check that is get a volt meter and check down on the plus that c…
-
good morning! what is the condition of your walking belt and deck? here is a link that shows different tests/things you can check: https://www.treadmilldoctor.com/shuts-down-during-a-workout
-
Your belt is worn - you can tell by the striping - you need a new one! If you have your model number handy I can get you a link to the correct belt size. You did say in another post you had checked the motor correct?
-
lol sounds like a manufacturer! Sorry to laugh but understandably they want to sell you expensive parts! I don't know if you saw this on our site but this explains how to test brushes: https://www.treadmilldoctor.com/treadmill-looses-power-when-…
-
Hello and thank you for sharing your concerns! Currently we do not have a way to adequately update our online presence with backorder information.
-
davedube87 that belt needs replacing - when you get stripes like that show it is getting bad!
-
While testing for voltage, you can unplug your treadmill and test the fuses, breakers, and wiring harnesses. There is a chance a breaker may have shorted open and not tripped. Please test these components individually and remember you want a close…
-
Here is a great how-to video on the subject align belt here are 2 more on adjusting belt https://www.treadmilldoctor.com/walking-belt-adjustment I think the first one will help the best!