jimbo97
About
- Username
- jimbo97
- Joined
- Visits
- 108
- Last Active
- Roles
- Member
Comments
-
You can test to see if you are getting 6vdc at the motor when you give it a command
-
then click on manual and it will show you how to get hood cover on on page 26 & 27
-
Sounds more like a bad motor.Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envelope that has t…
-
its style that threads in and has a central push pin
-
Crank puller;22mm
-
That drive motor is $329.99 plus $21.99 shipping. To order please call me 888-362-1105 then enter Ext 331 and ask for Jim.
-
Again - Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envelope that has the model number on th…
-
Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envelope that has the model number on the paper.
-
You need to take off covers to get to magnet, magnet is just hot glued in place. Q17,J06,R06,Q01,J05
-
Could be short in the motor itself.
-
Your not plugged into a GFCI or a AFCI?
-
The Large disk has 8 screws that go thru the cross crank arm piecethat screw into the back side of cover. That crank arm usally needs a crank arm puller to get off.
-
we don't have any guides, but just need to take off right side covers and arms and you will see the flywheel and where the magnet should be, the magnet is just hotglue into place on the flywheel.
-
Sounds like you may have a bad controller( Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envel…
-
Could be one of two things ,either a incline motor or a motor controller. Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is …
-
https://www.treadmilldoctor.com/alternate-calibration-codes
-
I would think about replacing walking belt and then make sure you lube it every 6 months. Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use this code 1982 at checkout for a 5% discount on…
-
No actually not , thats the way it comes.
-
This is what they should look like, and proform is out of stock of them at this time. https://www.fitnessrepairparts.com/cart/ViewItem/6091937
-
Sounds like the motor, but you always remove drive belt and see if motor still makes that noise.
-
The pcb is up in console, the motor & controller are under the hood cover down below.
-
Sounds like a motor controller or drive motor.
-
You can not a reset on that model, only thing that could be done is purchase a new console. https://www.treadmilldoctor.com/nordic-track-a2350-console-3 Once you've added items to your Cart, and you are ready to Check out and you put all your shippi…
-
Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envelope that has the model number on the paper.
-
Is the unit pluged into a GFCI or a AFCI OUTLET?
-
Sounds like the upper console is bad
-
Do you have the complete model number its located on a sticker down on the frame close to the floor when you fold unit up. Also you can look under the hood cover and there is a piece of paper inside a envelope that has the model number on the paper.
-
You may have to reinstall the software by purchasing a CNSL REPROG THUMB DRIVE and they are $96.55. To order please call me 888-362-1105 then enter Ext 331 and ask for Jim.
-
Sounds like the motor controller has gone bad, You would need Part Number 248187, Use this Discount code 1982 at checkout for a 5% discount on your order.
-
What is the serial number off treadmill?