Horizon 7.0 AT Stopped Working (Display Constanty Flashes through Users)
My Horizon 7.0 AT no longer works. It started acting up a few weeks ago where it would suddenly reduce speed to .5 and the users in the display would cycle through guest through five.
The treadmill stopped working and display cycles through the all the users but will not operate.
I checked the control board and it has power and the green light blinks once consistently.
Johnson Fitness previously replaced the control board and motor for a separate issue.
Any advice on what may be the problem is highly appreciated
The treadmill stopped working and display cycles through the all the users but will not operate.
I checked the control board and it has power and the green light blinks once consistently.
Johnson Fitness previously replaced the control board and motor for a separate issue.
Any advice on what may be the problem is highly appreciated
Comments