admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,292
- Last Active
- Roles
- Administrator
Comments
-
Try test on attachment
-
No you can not.
-
Not sure, you would need to contact nordictrack.
-
Sounds like it could still need to be lube, not real big fan of the spray lubricant. I would try a gel type lube.
-
I would may be think about replacing drive belt.
-
PAGE 29 IT SHOWS TO REMOVE 4 SCREWS FROM UNDER THE UNIT.
-
Could be a issue with in the motor it self.
-
When was the last time you lubricated underneath your running belt?
-
I would lubricate under the belt every 6 months. That may solve your issue.
-
I put a copy of your owners manual with this post so you can see how to remove hood cover. Also put attachment so you may find out where you slipping is coming from.
-
Sounds like a console is bad.
-
Should be down close to the Front roller on the left hand side as you are standing on treadmill. Its mounted to the frame in the manual its key # 95
-
Yes you can do that your self, just like replacing a battery in a car, just 2 connections
-
You do have 8 to 12 vdc on the red & black wires in the harness going up to the console?
-
Try pluging in wire one way and if that does not work try reversing the wires.
-
www.treadmilldoctor.com/bestbuyawards-treadmill
-
www.treadmilldoctor.com/mc-2000-installation
-
You have the safety key in place?
-
To order please call 888-362-1105 ext 331 ask for jim
-
That is the correct part, If you like to order please call into 888-362-1105 ext 331 just ask for Jim.
-
Its a motor controller which is located down by the drive motor.
-
Could be a motor controller or a drive motor. You can test drive motor with the attach I have given you. If the test good then its a motor controller.
-
www.iconservice.com/CustomerService/parts.do
-
Look under neath the treadmill and you may see what is holding those side rails in place
-
The price on that motor controller is $245.99 plus $6.99 shipping. contact me at 888-362-1105 ext 331 to order
-
Console does not use battery's does it? if not check on the connections at the motor controller and up at the console, what is your complete model number should start out may with a PFTL or 831.
-
I would need your complete model number of your unit to get a exact price for part. But the motor controller is down under the hood next to your drive motor and that is the component that allows your drive motor to run.
-
Make sure you recalibrate new mcb.
-
You need a new Motor controller.
-
No, That's the only place you can buy the parts no one else sells those parts.