admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,292
- Last Active
- Roles
- Administrator
Comments
-
The belt look fine, make sure when you lube the belt ,you apply lube under the belt onto the deck surface closes to the middle of the surface as you can. Also you can do a test and see if the drive belt is slipping or pulley has broken loose on fron…
-
By passing the transformer most likely cause a problem with the drive motor.
-
Sunny Health Fitness Toll Free: (877) 90SUNNY (877-907-8669) 218 Turnbull Canyon Road City of Industry, California 91745 United States T: (626) 968-1000 Mon-Fri 9:00 a.m. to 5:00 p.m (PST) F: (626) 968-1007 Mon-Fri (PST)
-
No problem enjoy your treadmill.
-
Those aren't codes, something is wrong with the upper console. That part is NLA
-
I would test your motor first with a 12v or 18v battery to see if motor is good. www.treadmilldoctor.com/motor-testing
-
I would lube it about 4 times a year.
-
Could be a bad motor or motor controller , try testing the amp draw. Repair Help Electrical Tests and Adjustments DC Amp Draw DC Amp Draw Measure on the hot DC lead (usually red) going from the controller to the drive motor. If you have a simple m…
-
motor is $199.99 plus shipping
-
Good luck
-
Could be the drive belt may be loose or the pulley on front roller may have broken loose.
-
Not really, sounds like you have 2 issues with your treadmill.
-
You should able to slide roller over to one side enough to pop out roller.
-
Did you try to Google it, we don't have it.
-
Good luck
-
contact this company , they repair those parts. http://www.fitnesselectronicrepairs.com/
-
We have the motor controllers , they are $299.99 plus shipping.
-
You should only be able to lift edge of belt up 2 to 3 inch's. You should use a 100% silcone lube non proteulum base lube
-
www.treadmilldoctor.com/pacemaster-gold-elite-upper-circuit-board-item-dgepcb
-
Could be a bad motor or motor controller and belt may be worn out also. What model treadmill is this.
-
Sounds like you have a bad Motor controller, also sounds like you have a bad upper console.
-
Sounds Like a Lower Board issue, and that part is no longer available.
-
Good luck
-
You want to be able to grab the edges of the drive belt and be able to twist it at least 45 degrees each way no more or less.
-
You will need a new display- They are $299.99 plus shipping.
-
Good luck.
-
Sounds like you have a problem with the upper console, may need to replace it.
-
No, sounds like a bad motor controller.
-
Sounds like a bad Motor controller
-
You need a new motor.