admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,114
- Last Active
- Roles
- Administrator
Comments
-
When you try to increase the incline or resistance do the numbers go up on console, if not then you have a console issue.
-
Hello and congrats on your new/old machine try this! https://www.treadmilldoctor.com/deck-padding-kit
-
Hello! Try this test and let us know! https://www.treadmilldoctor.com/icon-calibration-mc2100
-
sounds like your console needs replacing! https://www.treadmilldoctor.com/proform-performance-300i-pftl397150-console-371836 you can use code 1982 for a discount
-
hey - here is where you can go to check out a few tests https://www.treadmilldoctor.com/shuts-down-during-a-workout
-
that shows you are getting the required voltage - it is supposed to be and stay red! here for the motor - https://www.treadmilldoctor.com/motor-testing then: can you try these tests? https://www.treadmilldoctor.com/symptom-d-o-a-treadmill
-
https://www.treadmilldoctor.com/flywheel-removal
-
Thank you for sharing! I know these words will resonate with quite a few people!!!! Thank you also for the compliments on the belt - we appreciate comments such as these! Here are a few of our thoughts:: all installations are not the same - if y…
-
does the noise get louder as your speed increases?
-
seems you have tried everything you can - might need to take to the shop to have it removed
-
can you check the wires for 8-12v?
-
If you do not have 6-12v in your cables you need to change them out!
-
yay glad we could help! have a great rest of your week and let us know if you need anything else!
-
https://www.dropbox.com/s/wy5sxxaqq85d6e4/tempo evole ct ( upper console issues).pdf?dl=0 also here: https://www.dropbox.com/s/u678s0613octpwl/tempo evole ct (console issues).pdf?dl=0 if you do not have dropbox just hit the x in the upper right ha…
-
ok - looks like you are going to have to call in and special order this control board - I apologize for not having a direct link to this product! 888-362-1105 then push 2
-
we need the complete model number to verify correct item information
-
Sometimes error 7 could be a incline issue, parts for that unit are no longer available.
-
You are supposed to have 6-12v - if you only have 2v on the wires from the control board then the control board is bad and needs replacing... what is your model number?
-
Sounds like the belt is worn but here is a link to a few tests you can use; https://www.treadmilldoctor.com/treadmill-belt-bogs-down
-
Here is what we have! Calibration for the DMTX1 & DMTX2i Resistance Motor This should solve the 30 second pause issue in unit or rubbing issue when resistance is increased. Please remove the right side pedal arm, the te…
-
Sounds really like a motor controller issue.
-
Good morning! You must turn this clock-wise to remove!
-
Hi! I would lubricate the belt really well before replacing the motor as they can be expensive! Here is a link for lube - ours is actually formulated to repel dirt: https://www.treadmilldoctor.com/world-famous-lube On motors - it just depends as …
-
Hey! It is cold out there! Let's get you up and going! Have to tried to callibrate? https://www.treadmilldoctor.com/incline-calibration-instructions
-
You are most welcome!. Give us a call at 888-362-1105 if you would like some help with finding a part! Hope to talk to you soon!
-
Sounds like the motor is good, it make just need a new motor controller and also if walking belt is over 7 years old you may what to think about replacing walking belt and keep it lube once a year.
-
would need the complete model number off unit
-
Sounds like the bearings in the roller are knocking, only fix is to replace roller.
-
-
yay awesome news!!! glad it works!!!! dust is a beast!!!! happy new year!