admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,284
- Last Active
- Roles
- Administrator
Comments
-
Sounds like maybe a console, you may want to see if you have 12vdc up at top of wire harness on the black wire & red wire.
-
Its a bad motor controller. if you happen to purchase controller from us here is a discount code that will save you 10% on the parts. You can put this discount code 2158222590 in the Discount box on the checkout page where you put in you billing an…
-
Could be the speed sensor
-
LUBE DECK
-
I would try to lube the walking belt. LUBE DECK
-
Do you have a lights on down on your motor controller?
-
You would have to change console & overlay if your going to do that.
-
I would check for a loose or pinch wire in the harness.
-
That 313547 is not the model number, it would start out with NTL or 831
-
Sounds like a console issue.
-
what is the complete model number off unit and then I can let you know exact prices on parts and what is and what is not available.
-
I would check all your connections, at the motor controller and at the console. sounds like maybe you may have a few things wrong with it.
-
Sounds like a motor controller is bad.
-
THE INFORMATION MODE The console features an information mode that keeps track of treadmill information and allows you to personalize console settings. To select the information mode, hold down the Stop button while inserting the key into the consol…
-
Err Code 01 through 18 - (Button Error) Indicates the keyboard membrane has a stuck key. Do not hold down any key for more than 5 seconds or this error will appear. 1. Insert the magnetic key back into the control panel and do not touch any keys, if…
-
good luck
-
You actually will need to remove base frame from uprights in order to get to the front roller bolts. very bad design.
-
The belt should be lube every 6 months of use.
-
If motor test good , then you will need a motor controller.
-
I would test your drive motor first-https://www.treadmilldoctor.com/motor-testing
-
I would suggest to buy a new mcb, not a refurbished one.
-
Make sure to lube belt once a year.
-
Does console light up at all?
-
MY RUNNING BELT STOPS WHEN I STEP ON IT Here are a few things you can look into to see why your running belt is stopping when you walk on treadmill. • Let’s remove the hood cover on your treadmill. • Now run the treadmill at 2.5mph with…
-
Sounds like maybe you have a issue with drive belt or pulley on front roller.
-
Does the console take battery's?
-
No we do not repair parts, we only sell parts
-
Sounds like you may have a Motor Controller issue.
-
The reason they ask you not to plug it into a GFI, is when the motor starts it sometimes will spark which will cause a GFI to trip.
-
By code, you won't be able to change out those outlets, If the unit is running fine that just keep using it.