admin-it
About
- Username
- admin-it
- Joined
- Visits
- 3,114
- Last Active
- Roles
- Administrator
Comments
-
Hey - glad you found it! have a great day!
-
Good morning! the solid red light is good - that means that part is getting the correct voltage... here are a few things you can check when you do not have power: please check to make sure all wires are securely plugged in inside make sure there…
-
Hello! If you can provide your full model number we can get you a link to the part you need!
-
Hello! It sounds like your belt needs changing - quite possibly the deck! This is optimal for keeping your unit like new! Replacing the whole unit is expensive! if you let the unit run by itself with no one on it, If it runs fine and does not sh…
-
nothing is perfect in this world - and while we strive to always reach perfection with what we do, flukes happen! I think you just chanced upon a dud! At least they are working with you - I have had heard otherwise at times.....
-
I would call them if it is brand new! here try this! https://www.treadmilldoctor.com/incline-calibration-instructions
-
Hello and happy friday! Most likely it is a worn belt - how long has it been since it has been changed? here is a link to a few tests to narrow down your issue https://www.treadmilldoctor.com/shuts-down-during-a-workout
-
Hello! Do you have your exact model number and serial number?
-
GM! your belt is probably worn if the motor is working outside of the machine! https://www.treadmilldoctor.com/burning-smell
-
good morning! here is a link for some tests you can try! https://www.treadmilldoctor.com/incline-motor-problems
-
It is possible the board has a short... have you changed your belt lately? we find that worn belts cause serious electrical issues
-
I have a few links on tension! great job on the bolts! https://www.treadmilldoctor.com/walking-belt-adjustment
-
hey and ouch! if you have changed and lubed your belt recently - here are a few things you can look at.... Let’s remove the hood cover on your treadmill. Now run the treadmill at 2.5mph with no one on it and see how it runs. Now go ahead and step o…
-
Here are a few things you can look into to see why your running belt is stopping when she runs on the treadmill. Let’s remove the hood cover on your treadmill. Now run the treadmill at 2.5mph with no one on it and see how it runs. Now go ahead and …
-
Awesome! enjoy!
-
does the belt run fine without anyone on it?
-
With this choice it looks like spending more initially would be the better value due to non-manufactured parts being difficult to find in the long run to keep an older machine working. You have great choices here but in this instance, the new model…
-
the belt should not be touching the deck! how old is your belt? you might just need to replace it!
-
it sounds like a worn belt but it could be that the lower board is not sending voltage to the console and the only way to know this is if you have a voltmeter and can test the red wire & the black wire. You should have anywhere from 8vdc to 12v…
-
it sounds like you made sure all wires are securely plugged in inside please not check to make sure there is no crimping in the wires It could be that the lower board is not sending voltage to the console and the only way to know this is if you h…
-
ok if you are sure on the belt inspect all the wiring from the panel to the speed sensor first, then please check to make sure all wires are securely plugged in inside make sure there is no crimping in the wires It could be that the lower board i…
-
we do not have favorites but have seen quite a few fold-ups that are not too bad! https://www.treadmilldoctor.com/spirit-CT800-treadmill-review https://www.treadmilldoctor.com/nordictrack-commercial-2450-treadmill-review https://www.treadmilldoct…
-
great call to check first as there are numerous tests you can do before purchasing a controller... the very first thing to check is the condition of your belt and deck have you ever changed your belt?
-
here you go: https://www.treadmilldoctor.com/signal-generator-test
-
did you check the belt and deck to make sure they were in good condition? when friction is high it can damage the board
-
wow that is incredible it has lasted so long! here are a few things you can check when you have speed fluctuations: https://www.treadmilldoctor.com/testing-for-speed-problems
-
whoo hoo that is great news you were able to get it fixed! thank you for sharing!
-
it sounds like Its coming from motor, check the speed sensor and speed sensor disk on end of motor sounds like that is where the noise is coming from.
-
If your old MC-2100 Controller has a Transformer that is mounted to the treadmill frame then you will need to unhook the two harness's from the old controller and tie the wires out of the way because they will not be used on the new MC-2100.
-
Have you checked for 6-12v in the wiring?