jimbo97
About
- Username
- jimbo97
- Joined
- Visits
- 108
- Last Active
- Roles
- Member
Comments
-
I would check your speed sensor down below to make sure its a close to front roller as it could be,
-
Sounds like a bad motor controller: https://www.treadmilldoctor.com/livestrong-ls8-0t-c2-model-number-tm683b-motor-controller-part-number-1000111476 Once you've added items to your Cart, and you are ready to Check out and you put all your shipping i…
-
Nope, its a console issue. That console is out of stock at this time.
-
Then you have a bad console
-
And you got 17.5vdc?
-
You should checking for voltage at the upper console on the 8 pin connector.
-
we only carry the motor controllers ,not the transistors.
-
could be a console issue
-
run it at 2.5
-
Sounds like you have a worn out walking belt, belt normally only last about 8 to 10 years at the most. If you run treadmill with no one on it does it still shut down? If not then I would replace running belt and lube deck every 6 months. If you keep…
-
Sounds like a worn walking belt. does the unit do the same thing when you let unit run by itself with out any one on it?
-
Sorry we do not carry those caps, I don't know of any place you can purchase those.
-
You would need to contact Horizon for that set up.
-
Try using a screw extractor, you can get those at any lowes or home depot
-
You would need to contact icon fitness about that
-
sounds like you also have a console issue and those consoles are no longer available.
-
Sorry we don't carry that part
-
Sorry can't help you.
-
Sorry we don'y sell used parts,
-
Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use the code 1982 at checkout for a 5% discount on your order
-
Sounds like in both cases you would need a controller.
-
If amps check out okay, then i would say its a issue with motor controller
-
You always take a amp draw reading with load and with out load.https://www.treadmilldoctor.com/dc-amp-draw
-
Could be a issue with motor controller which can be caused by a worn walking belt.
-
Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use the code 1982 at checkout for a 5% discount on your order
-
controller
-
What happens if you let unit run by itself without anyone on it does it still shut down?
-
What happens if you let unit by itself with no one on it, If it runs fine and does not shut off then you know that the running belt would need to be replaced.
-
Sounds like a console issue.
-
Looks like the motor is not moving enough to make a difference