hgiljr
About
- Username
- hgiljr
- Joined
- Visits
- 30
- Last Active
- Roles
- Member
Comments
-
Last night I had found within the menu the incline calibration option and attempted it. Unfortunately I get an error message "the calibration process has failed. Please try again". I also tested power to the incline motor and I am getting the 120 …
-
Actually I think it the console itself... I just swapped out the motor controller board with the controller from my original treadmill that I have, and it did the same thing. Would not incline. I then took the controller back to the original tread…
-
So I decided to swap incline motor from the other 2950 treadmill I have and same results. The incline would not work. Now, both incline motors tested on my original 2950 and both work just fine. Would this be an issue with the motor controller boa…
-
Yes and they show the incline number selected on the console.
-
Thanks Kevin. I had actually tried that over the weekend and just tried it again. Doesn't do much. Does this mean it is the incline motor that is dead or should I look at something else before such determination?
-
Thank you Kevin. I actually came across a video that explains the LED blink patterns of the controller board. Mine starts up just fine and once the belt slows down, there is only one blink and a pause. My understanding from the video is that the …
-
Good day. The model of the machine is an NordicTrack NTL22114.0. Is there a way to test the motor controller? Thanks for getting back to me.
-
I just did an AC Amp test as my amp meter does not have for DC. I set the treadmill to 3 mph, around 1.2 amps. I began walking on it, and amps increase to about 2amps but since treadmill is beginning to slow down, it does not go any higher.
-
Thank you. For the time being I found a work around to get my running in. Will search to see if I find a console as well.
-
Yes. When I hit the start button, the manual workout begins at 1 mph. I cannot increase the speed either by using the plus button or the numbers on the side of the console for speed. I can only decrease speed using the minus button. The stop butt…