rmcderm313
About
- Username
- rmcderm313
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
PS for any others that might be looking for the same, the output plug inside polarity needs to be negative for this machine. The linked above transformer fits that bill.
-
Thank you. I checked on-line with no luck, but I'll call them as well. I think I found a suitable replacement, but I may need to splice the end of the old adapter if I need the screw on connector or if the coax-barrel size isn't correct. I appre…
-
Hi, Just closing the loop on this issue. I used a 1/2" round-over router bit to round both the front and back edges of the deck. It may have made a tiny difference but the sound is still very loud and high-pitched. Thanks for the advice and for t…
-
Ok great. Thanks for your help. I'll run out and get a round-over router bit and take the front and back edges off. For future reference do you sell parts for the T-240? For example could you have gotten me the correct thickness deck?
-
Thanks so much for the response. This makes sense. From your response you sound like this is a scenario that is familiar to you. Did they increase the running deck thickness for a reason? Do you have a recommendation on the angle of the bevel? …
-
As an aside, I didn't find the parts I was searching for at Treadmilldoctor.com, or I would have bought the parts from you. they were very hard to locate.