NordicTrack 1750 - NTL14221.2 - belt stopped moving
Hello Fellows,
My Nordictrack 1750 stopped towards the end of a workout and would not work again. console is working just fine and so is the incline/decline. upon start up, consoles boots up (Controller with solid red LED), upon manual start, the motor starts for a microsec (red LED starts to blink 4 times pause followed by 4 times in a loop). controller model is ICON - MC1648DLS - ZE0824 with white contacts. i had lubed the belt about a couple months ago and overall the machine looks good.
Sincerely,
Louis
My Nordictrack 1750 stopped towards the end of a workout and would not work again. console is working just fine and so is the incline/decline. upon start up, consoles boots up (Controller with solid red LED), upon manual start, the motor starts for a microsec (red LED starts to blink 4 times pause followed by 4 times in a loop). controller model is ICON - MC1648DLS - ZE0824 with white contacts. i had lubed the belt about a couple months ago and overall the machine looks good.
Sincerely,
Louis
Comments
https://www.treadmilldoctor.com/NordicTrack-COMMERCIAL-1750-Treadmill-Motor-Control-Board-445754
and Here is a code you can use on the checkout page for a 5% discount. (5offkevin)