It looks like you're new here. If you want to get involved, click one of these buttons!
Hot Deals on Treadmills
Questions About Buying A Treadmill
Treadmills For Sale
Hot Deals on Ellipticals
Questions About Buying A Elliptical
Ellipticals For Sale
Nordictrack treadmill C2000 NTL 1084.1 starts then stops
Nordictrack treadmill C2000 NTL 1084.1 starts at high speed then shuts down after 2 or 3 seconds. What could be causing this?
Typically when this occurs, it is an indication of a short circuit in the Treadmill Motor Control Board
Be sure to test the motor for a short-to-ground condition.
Be sure to test the other electrical part to confirm they do not have a short-to-ground condition.
Basically check for 8-12v on the red and black wires!
All I have is a 120 voltage tester. It lights up when I touch at the base of each wire on the board. Is there another instrument or way of testing this?
You need to check for volts DC on the black and red wires for the 8-12V. This is like checking voltage on a battery....as opposed to checking voltage on your wall outlet in your house. The logic board converts from the 120V AC from your wall outlet to the 8-12V DC to go from the logic board to the treadmill motor.
Power is ok and no loose wires?
did you check the belt and deck to make sure they were in good condition? when friction is high it can damage the board
Forum Software Powered by Vanilla