Timi
Hi, I have a Proform Performance 950. It got rain on it, so i let it dry out for a week or so before starting it.
When i turned it on, all was normal until the motor started then it threw the circuit breaker on the machine.
I have pulled the cover off and ensured everything is dry. i have ran the motor from an 18volt drill battery and it works fine. but every time i turn it on or reset the treadmill starts as normal until the motor starts up, it will only last a second and trips the breaker.
Do i need a new circuit board (controller) or is there a cheap fix?
Thanks
About
- Username
- Timi
- Joined
- Visits
- 3
- Last Active
- Roles
- Member