marsharabbit
About
- Username
- marsharabbit
- Joined
- Visits
- 15
- Last Active
- Roles
- Member
Comments
-
hm I did the speed calibration, and unfortunately it is still the same. I there another type of calibration I should be doing? It sounds like you are saying the blinking light means things are working normally, correct? I'm close to giving up but wo…
-
edited in first comment for clarity
-
couple more notes: the walking belt appears to be at about the right tension (lifts up about 2 inches) and I have lubricated it recently. When I start the machine the red LED indicator on the control board blinks steadily/rapidly
-
hi, update: I bought the control board and it did fix the problem I was having with the console not lighting up= it does now. New problem: The walking belt slows down or sometimes stops when I step on it. Seems to run just fine without any weight on…
-
thanks for the reply. I tested where the red and black wires plug in up at the console and did not have voltage. I also checked down at the control board where the wire from the console connects nad didn't really have a reading there either. Does th…