masTKI
About
- Username
- masTKI
- Joined
- Visits
- 41
- Last Active
- Roles
- Member
Comments
-
Many thanks So, the motor is not bad? then controller is also okay - at least does not blow the fuse if not connected to the motor. Any idea what else should I do to check troubleshoot ?
-
Hi Again, I checked the resistance on the motor is around 1 ohm. When I rotate the pulley, the resistance increase up to more than 100 ohm. is this an indication of short motor? how to check if the controller is working well?
-
the electrical panel use ABB DS271 AC C32 breaker. I dont think it is a GFCI or AFCI. the power cord has 13A fuse.
-
@jimbo97 Thanks for advices. The complete mdl number is NETL14917.0 as shown on the sticker as well as on the printed copy of user manuals. I have contacted the Nordictract / ICON customer services including the one printed on the front cover of th…
-
Thanks again @admin-it I removed the motor drive belt. Similar as before, once i initiate start, then immediately blew the 13A fuse in power cord. I notice the motor pulley rotates freely for few seconds. I do check the power source. It's equipped …
-
thanks @admin-it there's very small movement in fraction of second before immediately stop and trip the breaker. Seem like the belt stuck. However, I can easily move the belt by rotating the motor pully. I'm thinking to remove the motor's belt and…