frank
About
- Username
- frank
- Joined
- Visits
- 20
- Last Active
- Roles
- Member
Comments
-
I put a little less than 1 oz (all I had) of silicone lube on about a week ago. I ran 4 miles at 5 MPH that day. The current was around 5 amps. That is a drop of 3 amps from a few days prior. So it seems the lube did make a difference !! Sinc…
-
Got another ERR27 today after running a bit faster. Current read 9 amps. seems time to apply silicon. Hopefully avoid having to replace deck and/or belt.
-
The Deck does have some scuffing as shown on the deck you linked to. I measured current drawn by the treadmill as shown below. The treadmill is on a 20 amp circuit at 120 VAC. The motor is a 3.5 hp. Incline was at zero: 0 MPH: .2 amps 5 MPH: no…
-
Thank you for reply! How do you know when a deck is worn to the point of needing replacement? Thanks again!