Treadmill starts and then immediately stops (Image 15.5S)
I inherited an Image 15.5S from family. It was working fine, but after moving it in a truck it has stopped working. The display powers on fine, but selecting a speed will move the belt for a split second before stopping. The display continues counting, but the belt does not move.
I initially thought the speed sensor had gone bad, but replacing the old one did not resolve the issue. It looks like the motor controller board (MC-2100 rev A) has a single LED that stays solid, which AFAIK just means that it is receiving power.
Photo of the board + video of the belt starting and stopping: https://photos.app.goo.gl/J2bCkdGiZvk925N48
EDIT: combined photo and video into a single album
I initially thought the speed sensor had gone bad, but replacing the old one did not resolve the issue. It looks like the motor controller board (MC-2100 rev A) has a single LED that stays solid, which AFAIK just means that it is receiving power.
Photo of the board + video of the belt starting and stopping: https://photos.app.goo.gl/J2bCkdGiZvk925N48
EDIT: combined photo and video into a single album
Comments
Discount Code - COPY AND PASTE this code, 1982 in the discount code box for a 5% discount off your order,