Console Up Down wires

youngef · October 2023

I have a commercial NordicTrack 2950. When replacing a part in the console, I unplugged several things. One wire(s) that was unplugged, was the console up and down wires. Now, I do not know where they plug back into. Unfortunately, I did not take a picture beforehand. Lesson learned.

Can you help identify where the wires to raise and lower the console plug into? Thank you.

KevinC · October 2023

What is the model number of the 2950?

youngef · October 2023

NTL22115.1

youngef · October 2023

I believe it’s a 2016 year model

KevinC · October 2023

did you disconnect at the top of the upright post?

youngef · October 2023

I see the plugs from the upright posts and I’ve plugged those into the console wire plugs. I have power and incline/decline plus speed up and down. I have one wire plug that is plugged into the main circuit board from the console that goes nowhere and another plug that splits off the main plug on the right if facing the console from behind that connects to the post but the split off plug isn’t connected to anything. I’m thinking one or both of those plugs should plug into something and since the only thing not working is the console up and down, it must be one or both of this plugs.

youngef · October 2023

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0242-scaled.jpeg

youngef · October 2023

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0243-scaled.jpeg

KevinC · October 2023

I would check to see if the upright lift motors wires are in the upright posts. There will be one on either side.

youngef · October 2023

So, that’s in addition to the regular wires plus for power and such?

youngef · October 2023

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0245-scaled.jpeg

youngef · October 2023

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0244-scaled.jpeg

KevinC · October 2023

That looks like the main harness.

youngef · October 2023

Right. It is. So you’re saying there should be another plug coming up from both?

KevinC · October 2023

yes

youngef · October 2023

Okay. Thank you. I’ll look into it.

youngef · October 2023

I’m still not having any luck. Does anyone have a wiring diagram for the console up and down buttons? This again is for the Nordictrack Commercial 2950 NTL 19129.10 made around 2016. When I push either the up or down console buttons nothing happens. Thanks.

youngef · October 2023

This is not to be confused with the incline up and down buttons. Those work just fine.

KevinC · October 2023

I do not have that diagram and it's "out of stock" with Nordic Track

Howdy, Stranger!

Categories

Console Up Down wires

Comments

Howdy, Stranger!

Quick Links

Categories

Console Up Down wires

Comments