Console Up Down wires

youngef

I have a commercial NordicTrack 2950. When replacing a part in the console, I unplugged several things. One wire(s) that was unplugged, was the console up and down wires. Now, I do not know where they plug back into. Unfortunately, I did not take a picture beforehand. Lesson learned.

Can you help identify where the wires to raise and lower the console plug into? Thank you.

KevinC

What is the model number of the 2950?

youngef

NTL22115.1

youngef

I believe it’s a 2016 year model

KevinC

did you disconnect at the top of the upright post?

youngef

I see the plugs from the upright posts and I’ve plugged those into the console wire plugs. I have power and incline/decline plus speed up and down. I have one wire plug that is plugged into the main circuit board from the console that goes nowhere and another plug that splits off the main plug on the right if facing the console from behind that connects to the post but the split off plug isn’t connected to anything. I’m thinking one or both of those plugs should plug into something and since the only thing not working is the console up and down, it must be one or both of this plugs.

youngef

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0242-scaled.jpeg

youngef

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0243-scaled.jpeg

KevinC

I would check to see if the upright lift motors wires are in the upright posts. There will be one on either side.

youngef

So, that’s in addition to the regular wires plus for power and such?

youngef

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0245-scaled.jpeg

youngef

http://evanfyoung.com/wp-content/uploads/2023/10/IMG_0244-scaled.jpeg

KevinC

That looks like the main harness.

youngef

Right. It is. So you’re saying there should be another plug coming up from both?

KevinC

yes

youngef

Okay. Thank you. I’ll look into it.

youngef

I’m still not having any luck. Does anyone have a wiring diagram for the console up and down buttons? This again is for the Nordictrack Commercial 2950 NTL 19129.10 made around 2016. When I push either the up or down console buttons nothing happens. Thanks.

youngef

This is not to be confused with the incline up and down buttons. Those work just fine.

KevinC

I do not have that diagram and it's "out of stock" with Nordic Track