RScott

Comments

• Deck surface is smooth - no defects.

  in Older NordicTrack EXP1000i (NTTL09900) - hot motor and speed control issue Comment by RScott February 15
• Hi Kevin- Additional lubricating did not seem to make a difference in the amperage draw. I un-tensioned the drive belt a turn to see if I hadn't over tightened it trying to get rid of slippage. No difference in amps but more slippage. I loosen…

  in Older NordicTrack EXP1000i (NTTL09900) - hot motor and speed control issue Comment by RScott February 15
• I just completed a walking belt replacement on my Nordic Track EXP1000i "Space Saver" which sounds almost identical to your Proform - both from Ikon. I wish I had read these hints first. I figured out pretty much the same procedure on my own. I …

  in Proform 525 Space Saver Belt Change is not really hard. Comment by RScott February 13
• Hi Kevin- Thanks for your help. I installed the new walking belt and speed controller. The treadmill speed control appears to operate correctly. However the current draw seems high: at 2.5 mph, unloaded = 5 A, loaded = 11 A. My initial meas…

  in Older NordicTrack EXP1000i (NTTL09900) - hot motor and speed control issue Comment by RScott February 13
• Hi Kevin. Thank you for your responses. I did add more silicone and ran the treadmill. The current draw seems about the same. I walked for a little while thinking maybe the silicone would work in and operation might normalize. I did have a br…

  in Older NordicTrack EXP1000i (NTTL09900) - hot motor and speed control issue Comment by RScott January 26