jacastro7
About
- Username
- jacastro7
- Joined
- Visits
- 69
- Last Active
- Roles
- Member
Comments
-
Thank you so much!!
-
will be appreciated.
-
This is a crazy mystery. After two consoles changed, three controllers, and testing the motor many times, I am about to sell whatever I can, and trash whatever is left.
-
Wire harness is fine.
-
Then, something keeps burning the controller. I have no clue. Anyways, thank you.
-
I tested the out voltage to motor, but it's fluctuating. Don't know the reason. Could the motor be at fault, even if it works when tested with a battery? Could the motor cause a short circuit? If the controller is fried again, what could possibly …
-
Ok, great. I am about to test voltage to the motor. Can I tested without the console in place?
-
Thank you. Tested the motor and its good. Will try the voltages. Would you please send me an email to jacastro7@aol.com so I can send you a picture of the controller connections to see if they are alright. Thank you again.
-
I am sorry for answering so late. I lubed the belt desk. I started the tread mill and I heard a clicking sound, but no motor movement. I starter it again , and this time the breaker tripped. Turn it again, and the breaker did not trip , but motor st…
-
Stand corrected. Thank you.
-
Thank you!
-
To be honest, I never had. What I can do? Should I loose the belt to see? How do I lube it? Thank you
-
I have the same problem (no belt movement), but I want to share something weird that happened to me. I exchange the two pulse wires at the console, the left with the right and vice versa. I powered the unit and the belt started moving, but when I he…
-
Thank you so much!
-
Just find out it is the console. Do you know where I can find one used? Thank you
-
Does anyone here has an idea of what the heck is wrong with this treadmill
-
Wire harness is fine : (
-
I will check it from top to bottom. Will let you know. Thank you
-
I called the company and they said that the part is correct. Anything that I am missing?
-
One thing I noticed is that the board they send is 48wh instead of the original 50wh. Does that make a difference?
-
ICON, brand new controller
-
Yes, it does. You can also set the speed.