Spacers in rear end cap.

sf77sf77
in Treadmill Problems
Hi, I just recently replaced my walking belt with a Treadmill Doctor belt and when I took the rear end cap off the spacers fell out before I could see where they were. I can't figure out where they go back in. Could you please tell me how? A picture or video would be even better if available!! Thank you Shelly

Comments

  • admin-itadmin-it
    not sure what spacers you are talking about.
  • sf77sf77
    I just ordered an endcap from Treadmill Doctor and they came with it. There are 2 of them that need to go back in the endcap but I don't know where they go. I have a Nordictrack EXP1000.
    Here is a link to the spacer so you can see what I am talking about. https://www.ereplacementparts.com/images/part_p_919263_2604136811.gif
  • admin-itadmin-it
    They look like they go on the adjustment bolts.
  • sf77sf77
    edited January 2019
    Thank you. The slot is not wide enough for the bolt to go through but I will give it a shot. If you have any other ideas please let me know.
  • sf77sf77
    I figured out where it goes. It goes over the slot where the roller fits in the endcap. You put it on once you get the roller in place so that it is between the roller and the walking deck.
    I was able to find a diagram that showed it. Thank you for your help!!!
Sign In or Register to comment.