Pacemaster ProSelect Error Code 31

ontheyoteontheyote
in Treadmill Problems
I am having issues with my Pacemaster ProSelect. Getting the Error Code 31 every time I start it up. I replaced the optical sensor, but am still getting the same error code. I looked into the manual and there are two different sets up instructions - 1)IF THERE IS MOTOR MOVEMENT and 2)IF THERE IS NO MOTOR MOVEMENT. I definitely hear the motor trying when I attempt to turn on the treadmill, but no movement in terms of making the belt move.

Bought the treadmill used, so I don't think replacing the motor would be worth it. Any thoughts on if this can be fixed without replacing the drive motor?

Comments

  • admin-itadmin-it
    I would test motor to see if its bad or good first. https://www.treadmilldoctor.com/motor-testing
  • ontheyoteontheyote
    Thanks. So I tested the motor with a separate battery and the battery powered the motor fine. I assume this would mean there is an issue somewhere on the control board? What would be my next steps?
  • admin-itadmin-it
    The control board is no longer available for that unit.
    Treadmill Rescue Kit
    Here is something that we design for customers who need a console but find the consoles are no longer available, works on any treadmill if the Drive Motor still works.

    Speed is 0 to 10mph
    Unit will allow unit to incline, but will not show incline levels.

    Includes the Following and is price at $299.99 plus $12.99

    1. New Display
    2. New Motor Controller
    3. New Wire Harness
    4. New Speed Sensor
    5. New Safety Key
    How to install the Treadmill Rescue Kit-


    To order please call me 888-362-1105 then enter Ext 331 and ask for Jim or email at jvonwiegen@treadmilldoctor.com
Sign In or Register to comment.