Nordictrack C2450 Belt Not working
My Nordictrack C2450 abruptly quit on me during a workout today. The belt just stopped moving. The console continued to work. I performed the following actions:
1. Turned off then on. Following this when I did a manual start the belt started at a high speed and stopped after one second.
2. I tried a factory reset without success.
3. I then removed the motor cover. When I hit the start button the belt did not move at all. The solid red light on the controller then flashed 4 times, paused and continued this pattern. The control board maintained a solid green light throughout.
4. I next bypassed the controller and ran the motor off a battery. The belt moved no issues.
5. I can back later in the day and tried again. It started at a high speed for one second then abruptly quit and the entire system turned off and then came back on.
The model number is NTL17219.1
1. Turned off then on. Following this when I did a manual start the belt started at a high speed and stopped after one second.
2. I tried a factory reset without success.
3. I then removed the motor cover. When I hit the start button the belt did not move at all. The solid red light on the controller then flashed 4 times, paused and continued this pattern. The control board maintained a solid green light throughout.
4. I next bypassed the controller and ran the motor off a battery. The belt moved no issues.
5. I can back later in the day and tried again. It started at a high speed for one second then abruptly quit and the entire system turned off and then came back on.
The model number is NTL17219.1
Comments
and I would make sure you lubricate the belt real good too.
Here is a code you can use on the checkout page for a 5% discount (5offkevin)