My T5.5 incline will only go up during calibration

I should start off with that I have the MC2100 motor controller. I have replaced the sensor on the incline motor and still have the same problem. I can reverse the motor by swapping the red wire and black wire on the capacitor on the motor and it will drive in the downward direction. I don't want to spend the money for the controller pcb. I'm pretty confident that one of the power transistors is bad that control the motor. If I could get my hands on both of the transistors I would change them out. Does anyone have any ideas? Thanks for any help.

Comments

  • we only carry the motor controllers ,not the transistors.
  • How can I be sure the motor controller is the problem?
  • You just answer your own question, when you switch wires you can get unit to come down. Once you've added items to your Cart, and you are ready to Check out and you put all your shipping info in. Use this code 1982 at checkout for a 5% discount on your order
Sign In or Register to comment.