Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Timi

Hi, I have a Proform Performance 950. It got rain on it, so i let it dry out for a week or so before starting it. When i turned it on, all was normal until the motor started then it threw the circuit breaker on the machine. I have pulled the cover off and ensured everything is dry. i have ran the motor from an 18volt drill battery and it works fine. but every time i turn it on or reset the treadmill starts as normal until the motor starts up, it will only last a second and trips the breaker. Do i need a new circuit board (controller) or is there a cheap fix? Thanks

About

Username
Timi
Joined
Visits
3
Last Active
Roles
Member

Activity

  • Hi, I have a Proform Performance 950. It got rain on it, so i let it dry out for a week or so before starting it.
    When i turned it on, all was normal until the motor started then it threw the circuit breaker on the machine.
    I have pulled the cover off and ensured everything is dry. i have ran the motor from an 18volt drill battery and it works fine. but every time i turn it on or reset the treadmill starts as normal until the motor starts up, it will only last a second and trips the breaker.
    Do i need a new circuit board (controller) or is there a cheap fix?

    Thanks
    January 30