ERR CODE 8 ON PROMASTER ELITE

I left the emergency stop plug in my tread mill yesterday after working out and now have an err code 8 which unplugging and re-plugging did not solve. Any information would be appreciated.
Thanks,
Leonard

Comments

  • Err Code 01 through 18 - (Button Error) Indicates the keyboard membrane has a stuck key. Do not hold down any key for more than 5 seconds or this error will appear.
    1. Insert the magnetic key back into the control panel and do not touch any keys, if the error occurs, replace the keyboard membrane.
    2. In very rare cases, a defective upper circuit board can cause this error and the circuit board will need to be replaced.
Sign In or Register to comment.