Hi I have a Horizon T202 treadmill for which the incline motor has stopped working. After much troubleshooting I determined that the lift motor itself is not damaged (no gearbox or freezing issues, coil/capacitor all ok) and wires and harnesses all passed the continuity test on the control board. The console is beeping and controlling everything else. The only odd thing I noticed is that while the treadmill is plugged in and stopped from the console, the control board seems to be passing 120V current to the lift motor, when you would think current only should be sent to the lift motor when the treadmill is started.
Please let me know if I am on to something and if so what to look for.