Epic 550 treadmill - flywheel removal from motor

Hello, I have an Epic 550 treadmill that I'm trying to disassemble the motor to install new bearings. Any advice for removal of the flywheel? I've removed the set screw from the end of the shaft on the flywheel side but I'm not able to twist off the flywheel. Any advice is welcome.

Comments

  • Good morning!

    You must turn this clock-wise to remove!
  • You know I tried that, also counter clockwise, also tried each one after heating it up with a torch, but no success with any of this. The motor number is m 239967, it’s a 3.5hp motor.
Sign In or Register to comment.